Monday, June 14, 2010

HWg-WLD: Water leak detector

HWg_WLD_water leak detectorHWg-WLD is a network-enabled water leak detector with a water-absorbing sensing cable. HWg-WLD features a built-in web server, SNMP support, and e-mail alert to water flooding. HWg-WLD can remotely control a relay output over the network (a relay is switched when a water leak is detected along the sensing cable).

HWg-WLD detects water leaks or water floods along the entire length of the sensing cable. The sensing cable detects even the smallest volume of water, ethylene glycol, or other conductive liquid. HWg-WLD can be ordered in two versions depending on the supply of power (power adapter or PoE IEEE 802.3af). The sensing cable detects as little as a few drops of the liquid, and can be used to detect condensation. After flooding, the cable can be dried and reused.
HWg-WLD features a built-in web server and SNMP support. In case of an alarm, the device sends an e-mail or SNMP trap. Alarms can be also signaled by switching a remote relay over the Ethernet. When a leak is detected, HWg-WLD activates a relay of a remote Poseidon or Damocles unit (Box-2-Box mode).


Applications:
  • Detection of water leaking from pipes (cable runs along the pipes)
  • Detection cable laid along the walls
  • Under raised floors
  • Above suspended ceilings
  • Detection of water leaks in drip trays
  • Detection of water leaks under A/C outlets

LINKS


2 comments:

  1. Hi! I really like your blog. It contains nice information which will be quite useful. for more water leak detection equipments, check this out--water leak detection equipment

    ReplyDelete
  2. I like your blog and also like your valuable information. Now a days leak detection also use in chemical industries. Know more about leak detection check this - Leak detection

    ReplyDelete