HWg-WLD: Water leak detector

HWg-WLD is a network-enabled water leak detector with a water-absorbing sensing cable. HWg-WLD features a built-in web server, SNMP support, and e-mail alert to water flooding. HWg-WLD can remotely control a relay output over the network (a relay is switched when a water leak is detected along the sensing cable).

HWg-WLD detects water leaks or water floods along the entire length of the sensing cable. The sensing cable detects even the smallest volume of water, ethylene glycol, or other conductive liquid. HWg-WLD can be ordered in two versions depending on the supply of power (power adapter or PoE IEEE 802.3af). The sensing cable detects as little as a few drops of the liquid, and can be used to detect condensation. After flooding, the cable can be dried and reused.
HWg-WLD features a built-in web server and SNMP support. In case of an alarm, the device sends an e-mail or SNMP trap. Alarms can be also signaled by switching a remote relay over the Ethernet. When a leak is detected, HWg-WLD activates a relay of a remote Poseidon or Damocles unit (Box-2-Box mode).

Applications:

• Detection of water leaking from pipes (cable runs along the pipes)
• Detection cable laid along the walls
• Under raised floors
• Above suspended ceilings
• Detection of water leaks in drip trays
• Detection of water leaks under A/C outlets

LINKS

• HWg WLD: Water leak detector
• online demo
• HWg_WLD flyer
• HWg-WLD: Netzwerk Wasser-Leckage Detektor
• HWg-WLD: Rilevatore di perdite d’acqua Ethernet
• HWg-WLD: detektor wody IP
• HWg-WLD: detector de vazamento de água
• HWg-WLD: Vand lækage detektor (Web, SNMP, Email)
• HWg-WLD: Détecteur de fuites d'eau
• HWg-WLD: Detector de fugas de agua por IP (Web, SNMP, Email)
• HWg-WLD: Detector de scurgeri de apa Ethernet
• HWg-WLD: Сетевой детектор протечки воды

Damocles 1208: I/O over Ethernet

Damocles 1208 is a device with 12 remote inputs and 8 outputs over Ethernet with Web interface. The device provides M2M communication for connection to SNMP and SCADA systems. Damocles 1208 has pulse counters on digital inputs. The device supports E-mail and SNMP trap notifications of input state changes. Box-2-Box mode - outputs can be controlled over the LAN by another device.

Damocles 1208 provides digital inputs (DI) and digital outputs (DO) that can be remotely controlled over the Web. The Inputs and outputs can also be controlled over the network using M2M protocols (SNMP, Modbus/TCP, XML over HTTP. Typical application of Damocles 1208 involves energy consumption monitoring by counting pulses from meters. The HWg-PDMS application converts pulses to kWh per time period and creates MS Excel output reports.

Applications:

• Remote equipment monitoring:Monitoring of A/C, UPS, security system status (status relays)
• Energy consumption monitoring:Counting of pulses from electricity / water / gas meters. Conversion to price using HWg-PDMS in MS Excel.
• Alarm alerts:Turning on a warning light or a horn upon alarm at another unit (over the network, Box-2-Box mode)
• UPS and back-up generator monitoring:Fuel level, diesel generator status, remote start over IP
• Security systems:IP surveillance systems (external sensors) and Equipment status, access control systems
• SCADA:Connection of external inputs to multiple independent systems

LINKS

• Damocles 1208
• online demo
• Damocles 1208 flyer
• Damocles 1208: I/O über Netzwerk
• Damocles 1208: E/S por Ethernet
• Damocles 1208: E/S sur Ethernet
• Damocles 1208: I/O prin Ethernet
• Damocles 1208: SNMP Сетевой релейный блок